Model Number

JQ-ZL

NO. Description
01 Lifting Conveyer
Effective Conveying Length:4000mm
Motor Power: 1.5kw
The speed reducer adopts normal speed adjusting.
Conveying Width: 600mm
Capacity:500kg/h

02 Crusher (with water)
Motor Power: 30kw
Quantity of Rotary blades:6(made of material 9CrSi)
Quantity of Fixed blades:4(made of material 9CrSi)
Work width: 800mm
Capacity: 500kg/h
The advantage of crushing with water: Increase output and rough remove sand at the first step.

03 Screw feeding machine
Effective Length:4000mm
Screw Diameter:Ф380mm
Motor Power: 3kw
The parts contacted with raw materials are made of stainless steel.
Function: Send the crushed material into steamer.

04 Steam Washer
Diameter of Barrel: Φ2000mm
Effective Capacity: 5.6m³
Height: 2000mm
Stirring Motor Power:7.5kw
Specification:
Drive the mixer running, make the material rub.
The parts contacted with raw materials are made of stainless steel.
There is thermal keeping material around the machine.
Internal winding pipe steam heating.

05 Horizontal Washer
Effective Length: 7.5kw
Rotate speed: 400rpm
Rotor diameter: ø450mm
Effective length:4500mm
Transmission method: belt
Transmission bearing:
Combination of self aligning bearing and thrust bearing, smooth running
The parts contacted with raw material are made of stainless steel.
With the function of draining dirt
Function: High-speed stirring makes the paper and sand out of through the filter net.

06 Double Screw Floating Washer (with filter net)
Effective Length: 4500mm
Screw Diameter: Ф380mm
The parts contacted with raw materials are made of stainless steel.
Motor Power: 3kw
Transmission Bearing:
Combination of self aligning bearing and thrust bearing, smooth running
Screw Rotate Direction: Opposite in direction and run entad
Function: make the materials fully rotate, while screw is running, make the labels and caps float to the surface of water, and the flow to the garbage can, and at the same time, few remnant paper and sand are out of through filter net.

07 Dewatering Machine
Motor Power: 7.5kw
Rotor diameter: 600mm
Made of stainless steel
Principal Axis Running Speed:≥1000rpm
The water outlet is at the bottom
Function: Make the materials dry by high-speed rotating, and send the dry materials to the drier hopper.

08 Drying Hopper
Heating Power:22kw
Blower Power:0.55kw
Volume: 1000L
Stirring Power: 2.2kw
Function: Vaporize the water again, and reduce water-content of the Plastic piece.
09 Size :25M×4M×4M (L×W×H)